PURPOSE:To lighten and miniaturize a lead acid battery by forming double electrodes of an electrode plate, composed of conductive fiber holding active material, and a lead frame of a special form joined via conductive material. CONSTITUTION:Notches 4 are formed in the inner sides of a lead frame 1, and folded parts 3 are formed along a folded line. Conductive fibers 5 are caught with the notches 4...

PURPOSE:To improve adhesion between an electrode plate substrate and active substance, or bonding strength between the active substance and particle, by performing the primary drying of positive or negative electrode plate filled with paste-like active substance, and then applying induction heating. CONSTITUTION:An positive or negative electrode gate 1, filled with paste-like active substances, is...

PURPOSE:To reduce work mandays for battery jar formation of a lead and battery, and shorten a formation time, by sucking and cooling an electrolyte in the battery while adjusting pressure, and then supplying the electrolyte to the battery while adjusting liquid quantity. CONSTITUTION:A plug body, having the filler hole 3 and the suction hole 4 for an electrolyte, is provided on the lid body 2 of t...

PURPOSE:To provide a lead acid battery having an excellent charge and discharge cycle service life characteristic by manufacturing a plate in which active material paste is filled uniformly by means of the active material paste formed by reducing coarse particles being condensed and created while the paste is kneaded. CONSTITUTION:In active material paste manufactured by carrying out agitation and...

PURPOSE:To heighten porosity with a small quantity of pore creating particulates. CONSTITUTION:A hollow particulate which expands when it is heated and contracts when heating is stopped, is added to an active material as a pore creating particulate. In a plate ageing process, a plate is heated, and the pore creating particulate is expanded. When the heating is stopped, the pore creating particulat...

PURPOSE: To manufacture a modified bipolar sealed high output lead battery. CONSTITUTION: Grids 50 which are inserted through a non-conductive board, and are made of a folded expanded metal pasted by an electrochemically active material are provided. A frame 10 is equipped with a plastic insert, and a slot is equipped in the insert so as to receive the expanded metal grids. After the proper punchi...

PURPOSE:To provide an easily manufactured and stable and constant characteristic battery by arranging foamed acid proof plastic forms above filled powder, and arranging vertical directional through pores in the plastic forms. CONSTITUTION:A constant quantity of powder 13 is supplied to respective cells from the upper part of a battery jar 4, and is filled between negative electrode plates or aroun...

PURPOSE:To enable power supply to electric equipment equipped to a vehicle mounted with a generating device to be surely conducted, and enable cost to be reduced by simplifying maintenance work. CONSTITUTION:A pod 11 is provided on an outer side of a vehicle 1, and inside the pod 11 a ram air turbin generating device 12 for centralized generation is provided. The pod 11 is provided a space within ...

A device for inserting yarn on a yarn-holder cop in winding apparatus, of the type comprising a part (12) for trapping and inserting yarn (F) on the cop (14) moving between a backward rest position and a forward position for insertion of the yarn (F) on said yarn-holder cop (14) and means for cutting a lower branch of yarn (F3), comprising a cutting part (40) having a first and a second cutting el...

A gearbox for transmitting drive from the bowl of a decanter centrifuge to its screw conveyor comprises a double epicyclic gear train in which idler gears are inserted in the first stage between the sun and planet gears thereof to reverse the sense of rotation of the carrier which is fast with the sun gear of the second stage, in order that the second stage carrier is rotatable in the same directi...

PURPOSE: To obtain a circuit whereby multilevel information is stored as a current value by connecting a switching transistor, an amplifier transistor and an information storing capacitor to a recording line, an information line and respective nodes of fixed potential. CONSTITUTION: An information value to be stored is converted into the current value and impressed on the B-node and also a voltage...

PURPOSE:To uniform the film thickness of an organic film layer, control and optimize the energy distribution of the hole to be injected, and improve luminance and efficiency by using a titanium oxide thin film as a part or the whole of the hole transport layer of a light emitting element. CONSTITUTION:A titanium oxide film 103 is formed by sputtering 20nm thick on a transparent conductive film (IT...

PURPOSE:To provide noncontact feeding facilities for a travelling body capable of feeding in a noncontact, safe, and stable state, and to provide an optimal litz wire for the noncontact feeding facilities. CONSTITUTION:In noncontact feeding facilities for a travelling body provided with a pickup coil producing a electro motive force by resonating with the frequency of a permanent way which is laid...

A cured silicone rubber is produced by heating at a temperature of at least 150 degrees C. under a pressure of at least 9.8 kilopascals pressure a silicone rubber composition comprising an alkenyl-containing organopolysiloxane, an organohydrogensiloxane and finely divided silica in the absence of a hydrosilation catalyst or organoperoxide.

A process for producing a surface treated pigment wherein pigment particles are dispersed in a solution of a water soluble high polymer having radical generation sites to adsorb the water soluble high polymer on the surfaces of the pigment particles, adding a vinyl monomer to the resulting aqueous liquid dispersion of the pigment particles subjected to the adsorption treatment and polymerizing in ...

PURPOSE:To prevent generation of troubles such as wire breakage caused by segregation of CuSn alloy in processing. CONSTITUTION:A manufacturing method is provided with a process of forming composite billets by applying hot hydrostatic press work after filling CuSn alloy powder 2 in a pipe 1 made of Cu or Cu alloy in which a core material 3 comprising Nb or Nb alloy is disposed, a process of applyi...

PURPOSE:To improve critical current value characteristics of a superconductive wire by forming an Sn-included Cu plating layer for restricting diffusion of an Sn component on the surface of a primary composite body. CONSTITUTION:Billets of Cu-Sn alloy in which the other parts than Sn, Ti comprises Cu are formed to be a cylindrical body, an Nb rod is inserted into the cylindrical body, extrusion wo...

PURPOSE:To finely process a superconductive film without a degenerated part being formed on the surface and the side by removing an organic resist, and then, etching the whole surface. CONSTITUTION:A high-temperature superconductor film 12 and an insulator film 14 are epitaxially grown on a single crystal substrate 10. Next, after formation of an organic photoresist 16 on the insulator film 14, th...

Dispositif en optique intégrée pour le contrôle de la focalisation et de la position d'une image.
Ce dispositif comprend quatre moyens (D1, D2, D3, D4) pour détecter l'intensité lumineuse en quatre points (M1, M2, M3, M4) répartis dans le plan d'une structure de guidage (34, 36, 38) autour du foyer (44) d'une optique (02) de focalisation.
Application en optique intégrée.

In the system, rows of articles (1) are each assigned their own display module (5) which is fixed magnetically to the edge of the rack. The modules are supplied with solar electricity and have a display (5a) which shows goods to be picked. The modules also have a module for incrementing and decrementing goods. The modules (5) on a number of racks are swept by an infrared unit (7.1) mounted on a mo...