PURPOSE:To prevent noise occurrence by disengaging either one of clutch rings even in the idle running of a no-spin differential gear. CONSTITUTION:A pair of right and left front axles 20, 20 are rotatably inserted into a front axle case 21 and have respectively the inner ends spline fitted in differential hubs 22, 22. When a clutch (not shown) is disengaged, a no-spin differential gear can idle. ...

PURPOSE:To prevent noise occurrence by disengaging either one of clutch rings when a no-spin differential gear makes turning movement in idling. CONSTITUTION:A transmission shaft 47 is connected through a clutch (not shown) to an engine, and a brake device 50 is provided in a rotary portion of a power transmission path between said clutch and a center cam assembly 31 of a no-spin differential gear...

PURPOSE:To enable kick-down to be always carried out when a kick-sown switch performs a continuous switch operation from the low speed condition to high speed one of vehicle speed, by resetting a vehicle speed judging section to the operation of low speed condition operation. CONSTITUTION:The output of a vehicle speed detecting section 3 is supplied to the input of a vehicle speed judging section ...

PURPOSE:To hold hydraulic engaging elements under the pressurized condition below the engaging pressure without any special adjustment by providing a main pressure receiving surface and an auxiliary pressure receiving surface on an actuator to supply working oil only to the auxiliary pressure receiving surface in idling. CONSTITUTION:On an actuator 2 for operating an engaging element 1 are provide...

PURPOSE:To detect easily a program runaway by using a counter, etc. and with a reset instruction to decide whether or not the processing time for a prescribed number of instructions to be executed is set within time needed for normal execution of said instructions. CONSTITUTION:An information processor is started and the clocks are supplied to a CPU1 and a counter 4 from a clock generator 3. Then ...

PURPOSE:To detect an accurate temperature on the surface of a microcomputer chip by providing a temperature sensor and an A/D converter on said chip. CONSTITUTION:The voltage level of the output of a temperature sensor 2' is supplied to an A/D converter 2, and the output of the converter 2 is stored to a register 3 for result of conversion. The contents of the register 3 are shifted to an accumula...

The invention concerns a transfer case having an input shaft and two output shafts. The transfer case comprises a planetary gear set operatively connected between the input shaft and the two output shafts. With a manipulation of a single shift lever operatively connected to a slide member, the transfer case can be shifted into one of the following three conditions, first condition in which input r...

PURPOSE:To enhance the efficiency of dredging work by a method in which a suction ladder with a cutter which is supported in a tilting manner through the first supporter in the deep water area is set close to the cutter of the second supporter to be switched in shallow water area. CONSTITUTION:During the dredging work of deep water area, the bearing 16 of the hull supports detachably the trunnion ...

PURPOSE:To control the inclination of a slider caused by a difference of a peripheral speed, and to maintain stably a desired floating quantity by forming the first rail opposed to the inside peripheral side of a magnetic disk so that its width is wider by a prescribed quantity than that of the second rail opposed to the outside peripheral side. CONSTITUTION:As for a floating type magnetic head 1,...

PURPOSE:To prevent a magnetic disk from being damaged when starting a rotation of the magnetic disk by forming a slider surface of a magnetic head to a rough surface, so that an attraction of the slider surface of the magnetic head and the magnetic disk is not generated, even if the time when the magnetic disk does not rotate becomes long. CONSTITUTION:A slider surface of a magnetic head is usuall...

PURPOSE:To improve the thermal fatigue resistance performance of the joint part of an integrated material formed by metallurgical joining of different members by composing the solder material of a specific ratio of tin and the balance lead. CONSTITUTION:The solder material in which >=35wt% and <=80wt% tin is incorporated (exclusive of >=60wt% and <65wt%) and the balance consists substantially of l...

1. Thermally insulating composition formed of a mixture of refractory clay and/or kaolin, liquid or solid water-soluble inorganic binder, water and, as pore former, a combustible organic substance from husks of rice, wheat, oats, rye or barley, sawdust or cellulose mush or a mixture thereof, characterised by 20 to 50 parts by weight of refractory clay and/or kaolin, 5 to 30 parts by weight of liqu...

PURPOSE:To provide possibility of fitting a universal joint without requiring any special process on the rotary shaft by fitting a fastener ring on a tapered surface formed at the periphery of each shaft fitting part at both ends of the body, and by furnishing a fastening means working axially between this fastener ring and the body. CONSTITUTION:A hook joint 2 is formed in the central part of the...

PURPOSE:To make it easy to see a display part by turning the display part in the peripheral direction of a bar-shaped body in a receiver consisting of the bar- shaped body provided with a detecting part, a receiving part, and the display part. CONSTITUTION:A display part 23 is connected to the lower end of a receiving part 22, to which a hook-shaped detecting part 20 is connected through an insula...

PURPOSE:To always keep the opening part of a detection coil approximately in parallel to the surface of an input board with high stability, by putting a colored mark on the surface of a supporter to show the prescribed position relation between the surface of the opening part and that of the input board and also providing plural grip parts at the places close to the tip part of the supporter. CONS...

PURPOSE:To eliminate the defects caused in a production mode and also to facilitate its production by forming at least >=2 cut parts to a shielding tape for shielding and then enclosing completely a taper part at the tip of an inner case within a pen housing to set the taper part at a plane position. CONSTITUTION:Notched parts 41 and 41a are formed to shielding tapes 40a and 40b together with a co...