Systems and methods for providing an image on an organic product to provide a communication to the recipient or otherwise individualize the organic product. The image is photo-etched into a photosensitive material of a printing plane or cliché by the use of a film positive. Ink is applied to the cliché and a transfer medium is placed in contact with the cliché. The transfer medium lifts ink from t...

PROBLEM TO BE SOLVED: To provide a solid medicine preparation packaging device in which workability in mounting packaging paper in a roll shape on a rotary shaft at the time of the exchange work of the packaging paper, or the like, is improved.

SOLUTION: The solid medicine preparation packaging device is provided with a plurality of tablet cases respectively housing the solid medicine prepa...

PROBLEM TO BE SOLVED: To facilitate the starting/traveling on a slope by allowing a vehicle to travel at a speed as low as the creep speed on any slope gradient irrespective of an uphill slope or a downhill slope.

SOLUTION: The target creep vehicle speed is set when a driver has no starting/traveling will or no stopping will, the engine output is increased (or decreased) or the braking forc...

PROBLEM TO BE SOLVED: To estimate a change in road surface state in traveling and to cope with the change.

SOLUTION: After a rotation angle acceleration α of a motor directly outputting torque to the drive shaft connected to axle of the dirigible road wheels exceeds a threshold αslip for detecting occurrence of slip due to racing, a first peak angle acceleration α1 approaching a first peak ...

PROBLEM TO BE SOLVED: To provide an operation support device to prevent an operator from excessively depending on.

SOLUTION: An automatic braking device as the operation support device is equipped: with a dependency discrimination part (55) discriminating the dependency based on a ratio with which a service brake is driven by a brake actuator (30) in a plurality of drives of the service bra...

PROBLEM TO BE SOLVED: To provide a motor-driven power steering device which prevents suction of grease into a motor housing against a pressure change by thermal expansion/contraction of air in the motor housing, and preventing the suction of wetted atmosphere, dust or the like from the outside into the motor housing without reducing lubricity of bearing.

SOLUTION: An inserting and engaging ...

PROBLEM TO BE SOLVED: To prevent contact with an obstacle of a vehicle and running-off of a wheel into a ditch by giving warning notice to an occupant or a braking force to a vehicle in response to a state of approaching the obstacle of the vehicle.

SOLUTION: Distance L from the obstacle at the left side part of the vehicle is measured with an obstacle sensor (CCD camera) 7 built in a left ...

PROBLEM TO BE SOLVED: To provide a control device of a vehicle, which reduces vibration of the vehicle by carrying out partial cylinder operation of a variable cylinder engine while improving fuel consumption of the vehicle.

SOLUTION: When the vehicle is in an idling stop condition, neutral control of an automatic transmission 16 is performed while the partial cylinder operation of the vari...

PROBLEM TO BE SOLVED: To suppress a failure in shape of a packaged article or breakage of a welding-cut edge, and to well manufacture even a small and lightweight packaged article.

SOLUTION: A pressurizing means for pressing the article to be packaged downward and a supporting means for movably supporting the pressurizing means in a direction parallel to the carrying direction of a packagin...

PROBLEM TO BE SOLVED: To adjust position deviation of a strip-like packaging paper up to a seal part.

SOLUTION: A chemical packaging device has a core fitting part 10, a triangular plate 3, and a seal part 4. The core fitting part 10 is fitted to a shaft 11 fitted to a frame 8, has a rotating body to be rotated as a strip-like packaging paper 1a is fed by the seal part 4. The rotating body ...

PROBLEM TO BE SOLVED: To attain smooth travel without generating large shock even under low temperature and to prevent a belt slip of a belt-type continuously variable transmission.

SOLUTION: This engine output torque control device is provided with a variable speed means 40 for inputting driving force from an engine and changing the speed to output the driving force to driving wheels; an o...

PROBLEM TO BE SOLVED: To attain smooth travel without generating large shock even under extremely low temperature.

SOLUTION: This engine output torque control device is provided with a variable speed means 40 for inputting driving force from an engine and changing the speed to output the driving force to driving wheels; an oil temperature detecting means 55 for detecting the temperature of ...

PROBLEM TO BE SOLVED: To provide driving force transmission/control equipment capable of preventing overheat damage of a driving line system.

SOLUTION: When the temperature of the driving line system is about to surpass the preset level (S54: YES), a signal for demanding the lowering of engine torque is sent to an engine ECU32 (S58), thereby reducing the torque for an engine 30. Based on th...

PROBLEM TO BE SOLVED: To prevent a driver from feeling a sense of incongruity during control of a slip, in a control device for a vehicle to rotatably drive a drive wheel through driving a motor by the power of an engine.

SOLUTION: A slip occurs and in slip start control (S118), when a torque command value Tr* of a ring gear axis being a flywheel starter gear shaft being a drive shaft excee...

PROBLEM TO BE SOLVED: To provide a method for assembling a gear device in which a process and assembly of a case of the gear device having an oil reservoir are simplified and the number of components put in the case is reduced.

SOLUTION: In the method for assembling the gear device 2, engaged gears 3, 4 are assembled in an oil chamber 5a formed in the case 5. The gears 2, 3 are rotatably an...

PROBLEM TO BE SOLVED: To provide a structure of a multiple disc clutch of a transmission, which can shorten its axial length while securing power transmitting force between a rotary shaft and a clutch drum.

SOLUTION: The base 34 of the clutch drum 33 is spline-fitted to a counter shaft 21. A clutch hub 35 is supported by a driving gear 24. A base part 15 of another clutch hub 14 is provided...

PROBLEM TO BE SOLVED: To provide a down-shift controlling device for automatic transmission for vehicle with which the generation of a shock caused by the finish of a throttle opening restraining control is preferably suppressed.

SOLUTION: When a clutch-to-clutch down-shift judgment has been performed by a down-shift judgment deciding means 106, the drop of an engaging pressure of a relief ...

PROBLEM TO BE SOLVED: To make compact a whole power transmission especially in the axial direction while realizing reinforcement of the supporting rigidity and weight reduction of each gear mechanism for a parallel shaft gear mechanism as well as an inner gearing planetary gear mechanism.

SOLUTION: The first gear 130 of the parallel shaft gear mechanism 112 and a bearing section 194 of a ro...

PROBLEM TO BE SOLVED: To secure the clearance volume of a oil pan without lowering the ground height of the oil pan, and increase an oil margin during circulation.

SOLUTION: A hydraulic control valve unit 24 to control the hydraulic system of a continuously variable transmission is divided into a high pressure valve unit 24a to generate a secondary pressure and a primary pressure to operate...

PROBLEM TO BE SOLVED: To provide a motor with a reduction gear capable of meshing a small gear with a large gear respectively stored in a housing by relative movement in a direction orthogonal with the axial direction of the small gear with favorable assembling property, and a manufacturing method of the motor with the reduction gear.

SOLUTION: A drum type worm 30 integrally rotatably conne...