PURPOSE:To carry plates on the plate conveyor at fixed intervals by connecting an absorption panel mounting stand and a rod move stand with a spring-actuated link. CONSTITUTION:The plate conveyor 9 is installed at the lower position than the plate stock conveyor 1 on which the plate 2 is loaded. The absorption panel mounting stand 6 on which the absorption panel 5 with the absorption section 4 loc...

PURPOSE:To aim at enhancing the accelerating performance of a vehicle, by providing a means for determining whether the vehicle is in its accelerating condition or not in accordance with the rotational speed of a drive system so that when it is in the accelerating condition, the rotational speed is controlled to be set to a shift-up rotational speed which is lower than the normal shift-up rotation...

PURPOSE:To enhance transmitting efficiency and freedom of a design by constructing the center differential gear of a planetary gear mechanism and interlocking one of a sun gear, a carrier and a planetary gear to the driving side and the other to front and rear wheel sides. CONSTITUTION:A center differential gear 25 capable of transmitting driving power to both front and rear wheels at a fixed torq...

PURPOSE:To enable the operating performance of a vehicle to be improved by a large margin by providing, on a release pressure supply line, a variable throttle mechanism, whose opening area is varied in response to the running speed of the vehicle, and then providing an accumulator on the downstream side from said variable throttle mechanism. CONSTITUTION:Orifices 17, 18 are provided on both a line...

PURPOSE:To enable a transmission to function with stability even when it is applied to a large-sized disperser by arranging a main motor, a belt transmission and an epicycle reduction gear coaxially each other and in such order as mentioned above. CONSTITUTION:The axis of rotation l11 of a main motor A and the axis of rotation l12 of a transmission output shaft M are arranged coaxially. That is, a...

PURPOSE:To enable the line pressure in a V-belt type continuously variable transmission to be regulated steplessly in response to transmission gear ratios by transmitting the solenoid pressure for use in the control of transmission gear ratios to the back pressure chamber of a regulator valve. CONSTITUTION:A regulator valve 30 is provided for regulating the hydraulic pressure discharged from an oi...

The method is intended for drawing yarn off a bobbin in a weaving loom via a yarn guide eye etc. The distance (L) between the guide and the bobbin is automatically controlled during weaving, either directly as a function of the (measured) yarn tension or indirectly as a function of the tension, i.e. of the optimum tension which is itself a (known) function of the varying (measured) bobbin diameter...

A carboxylic acid or carboxylate is reacted with an isocyanate to produce gas which is used to give a blowing action in the manufacture of a foam plastics material, especially foam polyurethane. Preferably formic acid or a formate is used.

The device, which is connected to an element to be displaced, comprises a tubular body surrounded by sleeves which are inflated to a diameter slightly smaller than the diameter of the conduit. A motor-pump assembly located in the tubular body provides for the circulation of the fluid through the body so as to cause propulsion of the device within the conduit. Sensors may control automatic operatio...

An armoured submarine cable has a support collar 25 spaced from one end thereof and is secured to the armouring 26,27 of the cable on each side of the collar. The collar has an annular groove 24 which includes a radial shoulder which is downwardly facing when the cable adjacent the collar is disposed substantially vertically and which locates on flanges 23 of a support structure 21 in order to sup...

A brake release mechanism for a spring-loaded, normally applied vehicle brake releasable by system hydraulic pressure when the system is disabled includes a pilot-operated brake release valve for isolating the brake from the disabled system, a brake control valve disposed between the system and the brake, and a manual hydraulic pump communicating with the brake for supplying fluid pressure thereto...

A process for the preparation of extrudable polyimide granules comprising heating and compacting a powder containing polyimide particles to form a partially densified porous mass and crushing the mass to form granules which may be ram extruded to give uniform articles of high strength.

A brake actuating mechanism includes a housing defining a cylinder and a tubular piston, slidingly sealed within the cylinder. A pull-rod passes through the piston and is provided at one end with member for connection to a brake linkage mechanism. The other end of pull-rod is provided with abutment member which engages one end of a guide spool, the other end of the guide spool engaging the end of ...

A self-emulsifiable resin powder can be dispersed in water without utilizing additional surfactants or expending large amounts of mechanical energy. Such self-emulsifiable resin powders offer numerous distinct advantages over conventional latices. One of the most important benefits that is realized by utilizing self-emulsifiable resin powders is that they can be shipped dry which is the equivalent...

A b s t r a c t A system for registrating an article passing a predetermined area, and comprising a transmitter and a receiver with a common aerial alternately transmitting and receiving electromagnetic signals. A marker is attached to each article and receives said signals and transmits in turn other signals at passage of the area. The common transmitting and receiving aerial is formed as a multi...

A hardenable composition which comprises (i) a poly(carboxylic acid) or precursor thereof (as herein defined); (ii) a particulate ion-leachable silicate, aluminosilicate or metal oxide reactable with (i) in the presence of water to set to a hardened composition; and (iii) a compound comprising at least one phosphorus-carbon or phosphorus-boron covalent bond, in an amount effective in service to ex...

PURPOSE:To execute the start of a vector processing part at high speed by constituting the titled processor so that a display device is set, when a vector instruction decoder starts to decode a vector instruction train, and said display device is reset by decoding the vector instruction of a terminal of the vector instruction train. CONSTITUTION:When a vector processor is started, a scalar instruc...

Disclosed herein is a method and composition of matter for constructing temperature resistant parts for the metal making industry from a mix of refractory fibers and Silca-carbon in the form of burned rice hull ash.

PURPOSE:To contrive reducing number of processes by carrying out lead forming simultaneously with IC chip bonding by using a regulating pawl which regulates the position of an IC chip in X.Y directions on an IC chip stage and is used as a metal mold for lead forming. CONSTITUTION:An IC chip is transferred to the position B on an IC chip stage 8 and the IC chip 1 is shifted to a regulating position...

PURPOSE:To increase the adhesive strength of a plating metallic layer, and to prevent corrosions due to oxidation of external lead pins and a solder material completely by mounting a large number of the external lead pins, to the surfaces thereof protective layers in nickel are baked and which consist of copper, to a metallizing metallic layer fitted to an insulating vessel through the solder mate...