A machine including a feeding group or station, a first rotative cutting or creasing station, a second rotative cutting or creasing station and a rotative stripping station characterized by a single drive motor driving the various rotating tools of the stations and a feed roll of the feeding station. Each of the first and second stations and the stripping station have a frame with two lateral fram...

PURPOSE:To lighten a driver's burden in traveling at the time of a traffic snarl and garaging by making speed controllable from a predetermined car-speed to stop by only braking operation with the constitution where a car speed is controlled according to the pushing-down quantity of a brake pedal when a slow-speed traveling mode is set. CONSTITUTION:When a slow-speed traveling mode is set, a throt...

PURPOSE:To prevent an unpleasant steering wheel shock at the time of a brake start on a split road, by braking drive wheels at the time of a slip occurrence on the basis of the quantity of slip in drive wheels on both sides. CONSTITUTION:The 1st drive wheel speed means 11 detecting one drive wheel speed VFR, the 2nd drive wheel speed detecting means 12 detecting the other drive wheel speed VFL and...

PURPOSE:To restrict the loss of discharged heat to a minimum value and improve the efficiency of a solar heat utilization system by a method wherein upon completion of a thermal collecting operation, a hot thermal medium remaining in the thermal collecting line is recovered into an auxiliary thermal accumulating tank and the heat is returned back to the thermal collecting line before a thermal col...

PURPOSE:To decrease performance deterioration during storage for a long time without complicated maintenance by completely sealing a lead-acid battery after formation, in an atmosphere of inactive gas. CONSTITUTION:A lead-acid battery 10 is assembled and charged for formation. The fully charged lead-acid battery 10 is completed sealed with packaging material such as polypropylene package 11. In th...

PURPOSE:To make it possible to facilitate the specification of a three- dimensional control map, by controlling the reduction ratio in accordance with a three-dimensional control map based upon the rotational speed of an engine, the vehivle speed and the opening degree of a throttle valve. CONSTITUTION:A three-dimensional control map 1 in accordance with the rotational speed of an engine, the vehi...

PURPOSE:To make it possible to easily obtain a reduction ratio in accordance with the running condition of a vehicle, by setting the reduction ratio in accordance with the frequency of opening and closing of a throttle valve, the frequency of idle rotational speed and an averages vehicle speed. CONSTITUTION:Date of an averaged vehicle speed, the frequency of opening and closing of a throttle valve...

PURPOSE:To stabilize denitration and to enhance denitration efficiency by providing a chromium plated contact member with exhaust gas on the upstream side of a denitration reactor wherein the exhaust gas from an internal-combustion engine added with ammonia is catalytically reduced by a catalyst. CONSTITUTION:An internal-combustion engine and a waste heat recovery boiler provided with a denitratio...

PURPOSE:To obtain starting feeling representing a driver's intention, by providing such a constitution that a starting characteristic can be altered arbitrarily in accordance with the throttle opening degree, namely the stepping speed on an accelerator pedal. CONSTITUTION:A driving condition judging means A is provided to judge a driving condition based upon the detected signal transmitted from va...

PURPOSE:To enhance the safety of an industrial vehicle, by enabling a selector valve to be changed over only when a change-over switch is turned to its for ward travelling side or its backward travelling side under a preset predetermined condition in which both vehicle speed and engine rotational speed are below set reference values. CONSTITUTION:During a vehicle stopping with the engine rotationa...

PURPOSE:To enable a car to be suspended by one action accompanied with the provision of both easiness and safety of operations by configurating a device in such a way that a tension-slack control mechanism is linked wit a clutch so that the clutch may be disconnected when the said control mechanism of a drive belt is operated so as to be decelerated beyond the specified limit. CONSTITUTION:When a ...

PURPOSE:To prevent a vehicle from making an abrupt start, and also prevent a transmission from being damaged because of improper operations of an inching by providing an inching pedal for a vehicle such as a fork lift and the like equiped with an automatic transmission having a mechanical clutch so as to prepare the standby condition with the first speed. CONSTITUTION:When the stroke of an inching...

The present invention relates to anticonvulsant compounds useful in the treatment of epilepsy and other central nervous system disorders. The compounds of this invention have the following general formula: wherein R and R1, independently, are lower alkyl, aryl lower alkyl or phenyl, unsubstituted or substituted with at least one substituent; R2 and R3, independently, are hydrogen, lower al...

An apparatus for diagnosing a pulmonary ventilation function includes a flow sensor for detecting a breathing cycle of a patient, a gas regulator for supplying a gaseous contrast medium to the patient, and a CT scanner for performing X-ray scanning and photography of a patient's lungs during one breathing cycle, in response to an output signal from the flow sensor and for outputting a plurality of...