PROBLEM TO BE SOLVED: To enhance the shifting responsiveness in power ON down-shift operation when an accelerator is actuated for making re-acceleration in the accelerator OFF condition and prevent degradation of the drive feeling caused by shocks, etc., at the time of shifting. SOLUTION: During accelerator OFF running with the throttle valve opening &theta TH=0, the gear shift stage is establishe...

PROBLEM TO BE SOLVED: To provide an automatic clutch device which is not disengaged in case the driver has touched the knob of a shift lever undeliberately. SOLUTION: On the knob 18 of a shift lever 5, knob switches 19, 20, 21 are mounted which are turned ON when the operating force in the shift direction exceeds a set value, and a shift stroke sensor 7 to sense the shift direction stroke value an...

PROBLEM TO BE SOLVED: To improve layout property, and suppress vibration of a thrust direction by arranging a sliding member around which multiple belt material are wound on an inner circumferential surface of an outer peripheral part protruded in an axial direction of at least one side gear, and mounting a push-press member for energizing the sliding member in an enlarged diameter direction. SOLU...

PROBLEM TO BE SOLVED: To easily test an X-ray dose in an X-ray CT imaging system. SOLUTION: The dose of an imaging system is tested by using a signal from a detector array 18. Through the use of the signal intensity of the detector array, a picture noise and a collimator aperture are fixed to test the picture noise. In the concrete, through the use of the signal intensity from the detector array, ...

PROBLEM TO BE SOLVED: To effectively manufacture an inspissated platelet preparation without excessive extraction of platelets by increasing/decreasing the treated quantity of total blood to perform customizing on individual apheresis, and making the number of actually isolated medium density blood components, particularly platelets, equal to the requested unit number. SOLUTION: This apheresis dev...

PROBLEM TO BE SOLVED: To obtain efficient centrifugal separation treatment in a centrifugal separation device. SOLUTION: A first rotor 10 and a second rotor 12 are installed. A rack conveyance mechanism 14 and a tube transfer mechanism 16 are commonly used for these rotors. Rack accumulation stations 28, 30 corresponding to each rotor are formed, and the rack conveyance is carried out by using the...

PROBLEM TO BE SOLVED: To provide a thermoplastic polyurethane molded article contg. a thermosetting polyurethane waste and to provide a method for reusing the thermosetting polyurethane waste. SOLUTION: This thermoplastic polyurethane molded article is obtd. by mixing a ground product of a thermosetting polyurethane waste with a thermoplastic polyurethane. In addition, size of the ground product o...

PROBLEM TO BE SOLVED: To improve lubricating property of a friction clutch or the like by providing a yaw moment control function, and miniaturizing constitution. SOLUTION: This differential gear 1 is provided with differential mechanism 5 distributing the rotation of a differential case 3 to the axle side, shift gear sets 9, 11, 13 arranged between the differential case 3 and one side axle throug...

PROBLEM TO BE SOLVED: To provide a differential gear having a yaw moment control function with a differential lock function. SOLUTION: This differential gear is provided with a differential mechanism 7 for distributing the rotation of a differential case 5 to the axle 37, 39 side; shift mechanisms 11, 13, 15 arranged between the differential case 5 and the axle 39; friction clutches 17, 19 respect...

PROBLEM TO BE SOLVED: To prevent the generation of an inappropriate operating state as the whole system so as to improve vehicle-to-vehicle control and effectiveness of an alarm by judging the necessity, taking account of an operating state of other processing in the case of executing vehicle-to-vehicle control and alarm processing. SOLUTION: In the case of the generation of a state of actual vehi...

PROBLEM TO BE SOLVED: To prevent an automatic clutch from being connected before the completion of shift even in a low temperature case of a transmission. SOLUTION: When the gear stage of a transmission is mechanically shifted according to the operation of a shift lever, gear-in (slightly before the completion of shift) is judged by the on&rarr off change of a gear-in switch (S6), and an automatic...

PROBLEM TO BE SOLVED: To allow a patient to easily watch the important information by providing a means to designate the size of a letter to be printed, and printing the especially important information among items to be printed in large letters making use of an existing feed roller. SOLUTION: Necessary items are printed by a printer 30 on a packaging paper 6 which is held and carried by a feed ro...

PROBLEM TO BE SOLVED: To prevent the occurrence of poor sheets and eliminate work for removing the poor sheets. SOLUTION: A pair of guide plates 20 with guide grooves 23 formed therein are fixed to a stay 4 secured between frames 2, 3. A pair of air cylinders 25 via which rods are guided to the guide grooves 23 are fixed to the guide plates 20 and a moving plate 30 is carried between the rods of t...

PROBLEM TO BE SOLVED: To provide a carbon colloid which can be used not only to improve the performance of a battery but also as an activating agent of a battery, a rust preventive for the piping of a water circulating system and as an agent for promoting germination or growth of plants. SOLUTION: The ultrafine carbon particles are obtained by the electrolytic oxidation of carbon 4 used as an elec...

PROBLEM TO BE SOLVED: To prevent hunting that repeats automatic stop and restart by canceling the automatic stop control until the transfer of shift position from a non- driving position to a driving position is detected when the engine is restarted from its automatic stop state. SOLUTION: An engine 1 is restarted when predetermined restarting conditions are established in the automatic stop state...

PROBLEM TO BE SOLVED: To provide an atomizer simplifying a constitution and automatically operating. SOLUTION: A door 12 is turnably provided in a wall 16 of a toilet single room. An atomizer 20 is mounted on an inner wall surface 16b. A tank unit 22 with an atomized liquid put in and an atomizer unit 26 jetting the atomized liquid are connected by a pump unit 24. A tube member 32 is fixed to a mo...

PROBLEM TO BE SOLVED: To shorten the operating time of a motor-driven pump as much as practicable when an automatic clutch is to be shut off prior to the start of an engine. SOLUTION: At the stage that the oil pressure Po is boosted to the min. disengage pressure Pomin capable of disengaging an automatic clutch, a hydraulic pump is once stopped and a clutch solenoid valve is turned so as to emit a...

PROBLEM TO BE SOLVED: To establish a proper standby condition irrespective of varying temp. of a lubricating oil in a transmission. SOLUTION: The standby position CRCO is set on the basis of the input shaft revolving speed of a transmission (SS2) while the transmitted torque of an automatic clutch is changed immediately after the start of an engine, and the T/M oil temp. TT/M at this time is put i...

This invention concerns a device for supporting yarn windings such as reels, skeins and cakes in spooling machines. It includes a horizontal elastic bar (12) fixed to overhang a support bracket (11) which is susceptible to elastic oscillations in a vertical direction, a vertical elastic component (13) connected to and hanging from this said elastic bar which is susceptible to omni-directional swin...

Disclosed are compounds of formula (I) or the pharmaceutically acceptable salts thereof wherein: G represents a group of the formula (a), (b) or (c) where Ra and Rb represent hydrogen, or organic or inorganic substituents; A is an optionally substituted alkylene; R1, R2, R3, R4 represent organic or inorganic substituents; R5 is hydrogen or lower alkyl; R6 and R7 independently represent hydrogen, l...