PURPOSE: To obtain a sludge recovering device capable of smoothly scraping out the sludge deposited on the inside surface of a drum without the failure, etc., of discharge vanes by disposing plural notched parts at the side ends of the respective vanes of the discharge vanes in the positions shifted in the axial line direction of rotation. CONSTITUTION: The plural notched parts 24 are disposed at ...

PURPOSE: To facilitate the assembly of each member without applying boring or the like by engaging outer plates movably in the rotation axis direction of a differential case through collars of circular cross section, and locking the end faces of the collars to the large diameter part of a pinion shaft to stop the slip-off of the pinion shaft. CONSTITUTION: A pair of side gears 6, 7 meshed from bot...

PURPOSE: To prevent impact generated in association with down-shift at the decelerating time in a vehicle provided with an automatic transmission and a generator motor and so constituted as to convert the kinetic energy of the vehicle into electric energy to recover it at the decelerating time. CONSTITUTION: When an accelerator total closure sensor 71 detects the nondepression of an accelerator, a...

PURPOSE: To provide a downward slope coast detecting device correctly judging a vehicle to be coasting on a downward slope. CONSTITUTION: When the accelerator opening TVO is detected to be zero by an accelerator opening sensor 1 and the one-stage difference dVSP/dt of vehicle speed obtained by a one-stage difference computing unit 3 on the basis of vehicle speed VSP computed by a vehicle speed sen...

PURPOSE: To provide a vehicle control device that can prevent the degradation of drivability generated by cutting off fuel during the high speed rotation of an engine, for instance. CONSTITUTION: When TRC control is judged to be in execution in a step 200, whether drivability is in a degraded state is judged in a step 220. In a step 230, an up-line is changed to facilitate up-shift in order to imp...

PURPOSE: To restrain the working land from becoming rough by the slipping of one wheel while suppressing the lowering of turning performance in the travel structure of a working vehicle so constituted that power is transmitted being distributed to the traveling right and left wheels through differential mechanism. CONSTITUTION: The travel structure of a working vehicle is provided with a lateral p...

PURPOSE: To start rapidly and smoothly regardless of the grade of travel load at the start time by changing throttle opening at the engine start time by an opening control means according to the grade of travel load detected by a detecting means. CONSTITUTION: The judged result of travel load immediately before the stop of a vehicle is stored in a controller, and in the case of high load (SA2), th...

PURPOSE: To detect the degradation of road environment without using an exclusive sensor or judge the failure of a distance sensor without needing two distance sensors so as to secure the reliability of control while reducing cost. CONSTITUTION: A travel control device for an automobile is provided with a laser radar for detecting inter-vehicle distance between an own vehicle and a preceding vehic...

PURPOSE: To provide a travel control device performing vehicle speed control and alarm control with timing coinciding with the operating timing of a driver during follow-up travel. CONSTITUTION: An inter-vehicle distance sensor and a vehicle speed sensor 12 are provided to detect the speed of an own vehicle, relative speed and inter- vehicle distance. A control device ECU14 computes brake starting...

PURPOSE: To move a release point to a side, on which a stroke of a clutch pedal is larger, when an operation speed of the clutch pedal is higher than the preset value so as to automatically prevent abrasion in a clutch. CONSTITUTION: When a program controlling circuit 10 takes in an output from a clutch sensor 3 and determines a start, of clutch actuation, an A/D converter 10a takes in a clutch ac...

PURPOSE: To prevent fluctuation in a vehicle speed in a drastic change of a traveling load of a vehicle so as to accomplish smooth traveling. CONSTITUTION: In the case of a high traveling load, if a vehicle speed detection value is larger than a target vehicle speed by an offset value or more (step Sb6), a command value for required braking force is rapidly increased by a value d2 (step Sb7), and ...

PURPOSE: To detect an alarm flag aright at a time when something wrong has occurred in a brake switch as well as to prevent any confusion in control to be caused by this trouble by setting this alarm flag at the time of displaying any acceleration, where car speed information goes beyond the setting value, in a state of continuing this brake switch being turned on. CONSTITUTION: A program control ...

PURPOSE: To adjust a filling quantity in accordance with a packaging form for every kind only by arbitrarily setting filling quantity data from the external and reading the filling quantity data stored in a storage means in a packaging device for filling continuous packs sectioned from each other with a material to be packaged through a supply pump. CONSTITUTION: In a packaging device for filling ...

PURPOSE: To continuously conduct an action from filling to discharge by providing a filling means for filling a bag with powder-grain, a sub-gripping means for gripping the bag, a heat sealing means for sealing an open part of the filled bag, and a delivery means for discharging the filled bag. CONSTITUTION: A bag supplied from a bag-making mechanism 10 is sucked by a suction cup by a reversing me...

PURPOSE: To seal hermetically a filling material with wrapping film at a room temperature and in a clean condition, by using a device which is relatively simple in structure and can be realized at low cost. CONSTITUTION: On the top of the machine body 1 of an automatic wrapper is a clean box 2 into which clean air is forcibly supplied. In the clean box 2 are a reel 4 round which wrapping film F is...

PURPOSE: To provide sheet feeding equipment capable of constantly shifting the sheet to the sheet reference side even when a sheet loading means is elevated. CONSTITUTION: In sheet feeding equipment 13, a tray 14 to load the sheet S is suspended by wires 21a, 21b, 21c, 21d, and the tray 14 is elevated to feed the sheet S by winding the wires 21a, 21b, 21c, 21d by a winding winch 24. Pulleys 23a, 2...

PURPOSE: To restrain temperature change in a combuster due to increase and decrease of an electric power load by injecting either of steam of an exhaust heat recovery boiler system and a steam line system by way of selecting it in accordance with inlet temperature of a gas turbine, gas fuel and gas turbine set temperature. CONSTITUTION: A combuster is controlled in correspondence with an opening s...

Prepn. of meat or sausage product comprises chopping, mincing, mixing and/or treatment in a tumbler with addn. of CO2 pellets during the prepn. The meat is pref. placed in sausage skins without intermediate storage. The CO2 pellets are automatically dosed into the chopper, mincer, mixer and/or tumbler and the dosing device is controlled w.r.t. temp. of meat or sausage material. The pellets are mix...

The device consists of a bobbin (2) with two flanges (21) each having a support rim (22) formed on the inside of the flange and being generally a spiral of several turns that increases in axial distance from the bobbin centre on each turn. An inter-leafed divider support (3) in the form of a long band of variable width so that it will bridge the support rims on both flanges acts as support to the ...

The appts. to fit cord handles to tote bags has a section (15,16) to clamp the edges of the bag together with a punch (20) to stamp holes in the bag edges. A feed (19) guides the cord between the stamped holes for the cord ends to be knotted (17,18). At least the feed (19) for the cord (3) is at the clamping unit or can be positioned at it. Controls operate the punch stamping and cord feed alterna...