A secondary battery has positive and negative electrode members (12, 13) juxtaposed on a substantially identical plane. End faces of the positive and negative electrode members (12, 13) oppose each other at a distance. A substrate (11a) fixes and supports the positive and negative electrode members (12, 13). A cover member (11b) defines, with the substrate (11a), a sealed chamber including the pos...

PURPOSE:To prevent abnormal locking and seizing in a clutch device of a differential limitting device by constituting a cam to connect a friction clutch so that contact points move between cam surfaces and parallel surfaces because of deflection of an energizing member caused by thrust force. CONSTITUTION:When a pilot clutch 77 has been engaged and differential torque in a differential mechanism 4...

PURPOSE:To stabilize the total moisture reduction rate of paste by controlling the drying temperature with a temperature sensor measuring the paste temperature of an electrode plate or/and moisture detecting sensors measuring moisture before and after the dilute sulfuric acid coating process. CONSTITUTION:The temperature of the paste 7 filled in a lattice body 6 with a paste filling machine 5 is d...

PURPOSE:To make it impossible to move a web widthwise so as to apply tension to the web always evenly by providing detectors which detect positions for fitting-in of the web in U form so as to control the operation of the drawing-out part on the side surface extending from an opening to a suction port. CONSTITUTION:A specified tension is applied to web A by drawing it in U form inward within a suc...

PURPOSE:To effectively use solar heat for making salt by introducing condensed salt water into the lower convection layer in a solar pond maintained at high temp. with solar heat, heating and sending a part of the condensed high temp. salt water in the lower convection layer to multiple effect evaporator for recovery. CONSTITUTION:Condensed salt water 16 is introduced to the lower convection layer...

A shell impregnated catalyst for use in the production of vinyl acetate from ethylene, acetic acid and an oxygen containing gas is provided. The catalyst has a productivity of greater than 661 grams of vinyl acetate per hour per liter of catalyst at 150 DEG C. and consists essentially of: (1) a catalyst support having a particle diameter from about 3 to about 7 mm and a pore volume of 0.2 to 1.5 ...

PURPOSE:To dispense with a moisture absorbing film and a moisture-proof film on the outside due to sufficient moisture-proofness and generate little warp due to rigidity by using a metal-clad laminated plate for a back electrode. CONSTITUTION:An insulator layer 4 is laminated in contact with the metal foil 8a of a metal-clad laminated plate 8, then a phosphor layer 3, a transparent conducting elec...

PURPOSE:To effectively prevent the infiltration of moisture, prevent the deterioration of phosphors, and extend the life by pinching and sealing the connection face terminals of a moisture-proof outer film on the outer periphery with soft metal tapes. CONSTITUTION:The paste dispersed with barium titanic acid in high-dielectric resin cyanoethyl cellulose is coated and dried on a back electrode 6 ma...

PURPOSE:To largely partition an EL panel with high precision, improve the reliability and handling property, and reduce the cost by dividing a transparent electrode on a support film into luminous partitions, and laminating a sheet formed with a back electrode layer, an insulator layer and a luminous body layer. CONSTITUTION:An insulator layer 11 made of TiO2 and a luminous body layer 12 made of Z...

PURPOSE:To improve the intensity of an EL panel by guiding hydrogen gas into a vacuum tank, evaporating sulfur by the resistance wire heating method, and forming a luminous film by the electron beam deposition method. CONSTITUTION:A transparent electrode 2 made of ITO is formed on a glass substrate 1, and an insulating film 3 made of SiO2 and Si3N4 is overlapped on it. The substrate 1 is heated in...

PURPOSE:To increase the substrate temperature when a luminous film is formed, reduce the oxygen content, and improve the luminous intensity by exposing a Ni thin film connected to a transparent electrode near the end section of a glass substrate, and covering the transparent electrode with a heat-resistant insulating film. CONSTITUTION:A Ni thin film 7 connected to a transparent electrode 2 formed...

PURPOSE:To prevent malfunction of the integrated circuit due to noise on a power supply line by forming a drive circuit integrated in the integrated circuit device with a couple of output transistors (TRs), a delay circuit and a control circuit controlling the output TRsand differentiating a delay time from each delay circuit. CONSTITUTION:A delay circuit 21 is formed simply with components such a...

PCT No. PCT/NO90/00177 Sec. 371 Date Jun. 8, 1992 Sec. 102(e) Date Jun. 8, 1992 PCT Filed Nov. 29, 1990 PCT Pub. No. WO91/09076 PCT Pub. Date Jun. 27, 1991.A method for production of a crosslinked, foamed vinyl chloride containing polymer, by adding a blowing agent to a copolymer produced by a copolymerisation of a monomer composition comprising vinyl chloride and glycidyl containing monomer, and ...