PROBLEM TO BE SOLVED: To incorporate an externally operable differential lock mechanism into a differential gear for allocating driving force by a speed sensitive torque transmitting mechanism. SOLUTION: This device is provided with a differential case 3 which is rotatively driven by an engine, a viscosity couplings 5, 7 in which a housing 25 is connected to the differential case 3 and hubs 39, 41...

PROBLEM TO BE SOLVED: To simplify a structure, lighten a weight, reduce costs by controlling a C.S.D. function and a differential lock function by the same operating system. SOLUTION: This device is provided with a differential mechanism 5 distributed rotation of a differential case 3 through output side gears 39, 41, a frictional clutch 7 arranged between the side gears 39, 41 and the differentia...

PROBLEM TO BE SOLVED: To make a wheel crane safely run on the long slope way of a general public road while applying brake and by making other automobiles running in front and back of itself follow. SOLUTION: A control section is added to the controller 22 of a transmission control device 20 for controlling the transmission 3 of a wheel crane provided with a retarder 7 for automatically shifting d...

PROBLEM TO BE SOLVED: To prevent the misjudgment of an inertia phase control starting point due to the bound of the number of input shaft revolution and prevent the delay of the detection of the inertia phase control starting point before starting inertia phase. SOLUTION: Judgment of whether it is an inertia phase control starting point or not (160) is executed. If it is the inertia phase control ...

PROBLEM TO BE SOLVED: To provide an actuator dispensing with a rotational operating tool such as a spanner and capable of being manufactured in its compact size, by improving operability through a process of decreasing operating force in the manual operation and by providing no special manual operating part. SOLUTION: In an actuator composed of a main body 1 provided with an electric motor 3 and a...

PROBLEM TO BE SOLVED: To enable plural circuit boards to flexibly perform multiple connection to a serial bus. SOLUTION: An original software address must be allocated to each circuit board 12 before the board 12 can be used together with other circuit boards on a common serial bus 18. The original software address is allocated when a bus master device 20 outputs an address allocation command and ...

PROBLEM TO BE SOLVED: To shorten the formation time by providing a first step of penetrating a dilute sulfuric acid of a prescribed specific gravity to a unformed positive electrode plate using red lead as raw material, a second step of forming an electrode plate with a dilute sulfuric acid of a concentration lower than the prescribed specific gravity, and a third step of injecting the dilute sulf...

PROBLEM TO BE SOLVED: To prevent the lowering of the life performance of a negative electrode plate under a high temperature by adding bisphenols and sulfite or amino acid formaldehyde condensate to an active material. SOLUTION: The polymer average molecular weight of bisphenols and sulfite or amino acid formaldehyde condensate added to an active material is preferably 0.3-3.0× 10<4> . This c...

PROBLEM TO BE SOLVED: To simplify the sulfuric acid concentration and liquid quantity adjusting process of electrolyte after a formation process by discharging a part or the all of formation liquid after the battery jar formation and adding second dilute sulfuric acid having a concentration higher than the first dilute sulfuric acid used for the formation and third dilute sulfuric acid having a co...

PROBLEM TO BE SOLVED: To maintain the suppressing effect of electrolyte reduction for a long time by setting the electrolyte into a sol state by silica and by including phenolic organic compound in the electrolyte and/or the negative electrode. SOLUTION: A battery contains metal which reduces hydrogen overvoltage of a negative electrode as an alloy component for the positive electrode grid body. S...

PROBLEM TO BE SOLVED: To improve the cycle life by using Pb-Sb based alloy containing a specific rate of Sb for a positive electrode and including lignin in a separator between a positive and a negative electrode plates. SOLUTION: Pb-Sb based alloy used for a positive electrode grid contains Sb more than 0.5% and less than 1.7%. This constitution can prevent early capacity reduction in the positiv...

Un artículo absorbente que comprende una hoja posterior, una hoja superior una región de adquisición/distribución de fluido y por lo menos una región de almacenamiento de fluido, el artículo antes mencionado tiene un funcionamiento de adquisición total del producto de más de 3,75 ml/segundo aproximadamente en el primer chorro y una altura de pila empaquetada inferior a 9,9 mm. que se caracteriza e...

The safety convenient clamp includes a clamp body whose bottom portion possesses a barb portion; between inside board and outside board of the clamp body, a moving body capable of up-down sliding is set, and its bottom portion can be bent into a slipped surface with an outward projected angle and a slip board which can be slided into the slot of barb portion, and the inside board of the clamp body...

A method of making a tire having a precisely located applique (1) and optionally scuff ribs (16) to protect the applique. The applique preferably is applied to a green tire case (6) on a tire building drum and placed in curing mold and cured without disfiguring the applique or obtain substantial rejects or blemishes. The mold preferably contains grooves (15) to produce scuff ribs (16) in the tire ...

A method of making a tire having a precisely located applique and said tire. The applique (1) preferably is applied to a green tire case (6) on a tire building drum and placed in curing mold and cured without disfiguring the applique or obtain substantial rejects or blemishes. This method uses an applique (1) formed of a non-staining film, preferably of an acetate or polyester film, printed with a...

PROBLEM TO BE SOLVED: To suppress fault message from being outputted in large amount by suppressing the uniform output of fault messages of fault of other device occurring inevitably owing to a fault of one device and outputting only a fault message representing various message. SOLUTION: A fault processing means 10i, a message accepting means 11, a message buffer managing means 12, a fault messag...

PROBLEM TO BE SOLVED: To prevent overloading on an inverter at the time of motor lock, by limiting a torque command value if detected motor revolution speed is smaller than a prescribed value and estimated element jointed part temperature exceeds a prescribed value, and limiting the current of respective switching elements according to it. SOLUTION: If motor revolution speed is smaller than a pres...

PROBLEM TO BE SOLVED: To shorten stand-by time and increase charging efficiency by efficiently cooling a battery stored in a battery case. SOLUTION: In a charger 23 having a recessed section for setting a battery case 2 in, a fan 23 is installed. A ventilation port 19, which ventilates when the fan 23 is driven, is formed in a sidewall of the recessed section. In the part of a wall of the battery ...

The improvements permit to convert a sofa having standard cross dimensions into a bed of ordinary length. The folding frame consists in an articulated structure formed by a fixed frame (1), a mobile frame (2), an intermediate frame (3), an auxiliary frame (4) and a further auxiliary frame (5) integral with two supporting legs (6), that acts as support of the stuffing of the back of the sofa or, al...