PURPOSE:To prevent slip generation caused by shift-down and improve accelerating performance by confining shift-down prohibition to the condition of small friction of a road surface in a system having a shift-down prohibiting means which sets the opening of a throttle means so that it may not exceed the threshold of the shift-down. CONSTITUTION:Calculation B is made for the target value of opening...

PURPOSE:To improve operation performance by constituting so that operation for running or for stop is carried out through vertical movement in the front and rear direction of a main clutch lever provided at a handle post and turning operation to right and left is carried out through turning of the lever in the horizontal direction so as to enable operation with one hand. CONSTITUTION:In a carrier ...

PURPOSE:To prevent slip caused by shift-up by setting a closing control period of a throttle valve when a transmission is shifted from the first speed to the second speed in acceleration slip control until the shift-up is actually carried out after a shift command signal is outputted. CONSTITUTION:In the case acceleration slip is detected by means of a detecting means A according to speed of a dri...

Non-stick coating systems can be applied to untreated smooth glass and ceramic substrates with a polysiloxane undercoat overlaid with a second undercoat of polyamide imide preferably containing colloidal silica and surfactant, with each undercoat in the range of 0.1-5.0 microns thick.

A closure which permits the opening of a membrane seal of an enteral nutritional product container in a single-action motion while maintaining product sterility. This closure includes a general cylindrical side wall having threads along the inner surface thereof, a planar top surface having first and second upwardly extending projections. The first projection is associated with a filter means for ...

A heart-synchronized pulsed laser system includes a laser; a device for sensing the contraction and expansion of a beating heart to be synchronized with the laser; a device, responsive to the device for sensing, for generating a trigger pulse; a control for positioning the leading edge of the trigger pulse during the contraction and expansion cycle of the heartbeat; a control for defining the widt...

Solutions of segmented polyurethanes are coagulated to form flat circular microporous structures having a substantially continuous pore-free surface and a substantially open pore surface.

A transparent polyurethane layer which is resistant to fogging. The layer contains monomers and/or oligomers of acrylic acid or of salts of said acid grafted radiochemically to the surface of said layer. The layer is used as a coating layer for laminated glazings.

Novel esters containing bonded fluorocarbon and oxypropylenealkylether groups and of the formula or where Rf is straight-chain or branched, partially fluorinated or perfluorinated alkyl of 2 to 10 carbon atoms, partially fluorinated or perfluorinated cycloalkyl of 4 to 8 carbon atoms, perfluorophenyl or perfluoroalkylphenyl where the perfluoroalkyl radical is of 1 to 6 carbon at...

A bottle thread inspection apparatus for inspecting a bottle thread arranged in a generally spiral configuration about the periphery of a bottle neck having a central longitudinal axis comprising: A light source for illuminating the bottle thread; a mirror assembly for reflecting light received from the bottle thread into an imaging lens assembly; an imaging lens assembly for focusing a full-lengt...

For each test element being tested in a clinical analyzer, there is a corresponding calibration curve. However, the calibration curve is defined by an equation having calibration coefficients which must be imparted to the analyzer so that the appropriate results can be calculated from the measurements taken off the test element. One way of imparting the calibration coefficients is to supply them i...

The locations of defects in flat glass (1) are detected during conveyance through a detection station where the glass is scanned by a radiation beam (11). The beam sweeps transversely across the path of the glass through a distance in excess of the glass width so that the beam sweeps through both side edges. Beam deflection occurs when the beam encounters a side edge boundary of the glass (1) and ...

PURPOSE:To obtain a mark discriminating method for an unattended tack where the mark is discriminated with high accuracy by installing plural magnets to the mark part in different pattern. CONSTITUTION:Mark detectors 7a, 7b are arranged in order in the progressing direction of the unattended track 1, the same sensitivity is given to them and they generate an output proportional to a distance betwe...

PURPOSE:To manufacture Al alloy powder suitable for various kind of coating and pigment by pulverizing the specific composition of molten Al-Ni-Ca alloy to make the specific shape of amorphous powder. CONSTITUTION:The molten Al alloy 1 incorporating 83-91% Al and 0.5-5% Ca as the amorphous element, and 8-12% Ni, is poured from a nozzle 2 and by injecting inert gas of N, Ar He, etc., or air, etc., ...

PURPOSE:To reduce he number of parts, to miniaturize a device and to prevent positional deviation caused by vibration from occurring at the same time by integrating a reflecting mirror and a lens by joining the flanges thereof and integrating both end bases of a light emitting tube by being interposed between the flanges at the same time. CONSTITUTION:The light emitting tube 1 enclosing metal hali...

The invention concerns a method and an apparatus for the automatic control of a guided vehicle (2) and proposes a new safety concept which, if breakdowns and/or emergencies arise, prevents the vehicle from being stopped in tunnels, on bridges or on pathless terrain. The invention lies in that between preselected stopping regions (11, 12, 13) provided with system for evaluation of passengers and fo...

De uitvinding betreft een mechamisme dat het open en terug dichklappen van twee onder elkaar scharnierende frameonderdelen van een divanbed mogelijk maakt en het omklapbaar, bovenste, onderdeel hiervan ten opzichte van het onderste onderdeel stabiliseert.; The invention relates to a mechanism for opening and closing, by folding, two parts hinged together of a frame for a sofabed, and for stabilisi...

A noise muffling assembly, particularly for use with toothed wheel gear units having a partitioned housing (1), within which moving machine elements (2) are positioned, the shafts (3, 4) of which are supported in the housing, whereby only one housing part (6) is, by the attachment bases (7, 7'), attached to a base (8). At least the housing part (6) which is connected by the attachment base (7, 7')...

High pressure atomizing nozzle includes a high pressure gas manifold having a divergent expansion chamber between a gas inlet and arcuate manifold segment to minimize standing shock wave patterns in the manifold and thereby improve filling of the manifold with high pressure gas for improved melt atomization. The atomizing nozzle is especially useful in atomizing rare earth-transition metal alloys ...