PURPOSE:To invariably perform the follow running control of a vehicle after a preceding vehicle stably by assuming that the preceding vehicle is located on the running path of this vehicle near the boundary of the inter-vehicle distance when no preceding vehicle exists in the preset inter-vehicle distance, and controlling this vehicle for acceleration or deceleration. CONSTITUTION:A vehicle is acc...

PURPOSE:To improve the discharge capacity by holding an electrolyte 20% or above of the volume of an electrode plate group in a positive electrode plate, holding the electrolyte with the volume corresponding to 75% or above of the electrolyte of the positive electrode plate in a negative electrode plate, and setting the thickness of the positive electrode plate to 5.8mm or below. CONSTITUTION:It i...

PURPOSE:To optimize a secondary pressure to a minimum causing no belt slip and improve transmission efficiency by conducting control by adding a secondary pressure correction quantity to a target secondary pressure at the time of operation of anti-lock brake or traction control. CONSTITUTION:At the time of operation of anti-lock brake or traction control, a fluctuation torque is determined by the ...

A centrifugal processing system for cultured cellular suspensions comprises a reservoir (66) for pooling a desired volume of the cellular suspension from a plurality of individual containers (60) in which the cellular suspension have been cultured. A centrifugation chamber (36) is provided operative in response to centrifugal force for separating the cellular suspension into a cellular component a...

A tension controller for controlling the tension of running paper web. When a rotary press starts to operate and performs a minimum speed operation, the controller balances the tension of the paper web between a floating roller and a dancer roller, thereby easily bringing the dancer roller to the central position of its swing stroke. Also, the tension controller deactivates a dancer roller positio...

PURPOSE:To permit smooth work by constituting the titled device so that the speed stage selected at present is maintained when the engine revolution speed reaches a prescribed value or less, while the speed corresponding to the car speed at that time point is set when the engine revolution speed becomes over a prescribed revolution speed. CONSTITUTION:A speed stage holding function-automatic selec...

Disclosed are compounds of formula (I) or the pharmaceutically acceptable salts thereof wherein: G represents a group of the formula (a), (b) or (c) where Ra and Rb represent hydrogen, or organic or inorganic substituents; A is an optionally substituted alkylene; R1, R2, R3, R4 represent organic or inorganic substituents; R5 is hydrogen or lower alkyl; R6 and R7 independently represent hydrogen, l...

Novel non-ionic contrast media are efficiently prepared from generally available ionic contrast media or non-iodinated precursors. Particularly, polyhydroxyhalo-hydrocarbons are employed with a triiodo-substituted acylamido benzoic acids in aqueous weakly basic media to selectively substitute the amido nitrogen, followed by activation of the carboxyl group for amide formation.

La présente invention concerne un procédé d'extraction d'ions halogénures contenus dans une solution de traitement photographique.L'invention concerne un procédé d'extraction sélective d'ions halogénures à l'aide d'une membrane séparative comprenant un support recouvert d'une couche active comprenant un matériau hydrogel inorganique et un transporteur d'ions, une des faces du support ayant été ...

The system is used in the construction of the so-called solarhouses. It has an increased accumulation capacity, part of theaccumulated heat being also capable of utilization for residentialhot-water supply (RHWS). The system has an under-roof space (4) inwhich first water accumulators (6) with first coils (14) in themare fitted, second water accumulator (13) with second coils (16)in them, coils (1...

The panel and the connection are used in civil works. Itenables the accumulation of heat in the joint and in the shortupper and lower edges, and by airducts this energy can be used forheating of the premisses and for warming the air in the wateraccumulation tanks designed for residential needs. The panel andthe connection between panels are interconnected by a fin (1)which is made of an external p...

In a centrifugal separator for separating solid particles from a liquid, a centrifugal rotor (2) has two axially separated end walls (13, 14) and a surrounding wall (17) arranged therebetween. The end walls (13, 14) and the surrounding wall (17) surround a separation chamber (20) in which there are arranged separation discs (21) and one or more conveyor screws (29, 62) for axial transportation of ...

In a centrifugal rotor (2) for freeing a liquid from solid particles suspended therein and being heavier than the liquid there is delimited a separation chamber (20), in which one or more conveyor screws (29) are arranged to supply separated particles axially along a surrounding wall (17) of the rotor. Each conveyor screw (29) is connected with a drivable bearing member (31) through a transmission...

A high integrity liposome comprising at least one stable lipid and at least one peptide-like therapeutic agent associated with said liposome, adapted for parenteral administration to an animal, including a human, and method of manufacture and use.

PURPOSE:To obtain an organic EL element having little initial deterioration while stabilizing operation by adding an aging process, which impresses voltage consisting of forward voltage or reverse voltage, or of combined waveform of both voltage to organic electroluminescence element, to a manufacturing process of the organic electroluminescence element. CONSTITUTION:In an organic EL element to be...

PURPOSE:To provide the process for production of the metallic powder capable of easily producing fine powder without degrading productivity. CONSTITUTION:A cooling liquid layer 9 flowing down while swirling is formed on the inner peripheral surface of a cylindrical body 1 for cooling and molten metal 25 is supplied to this cooling liquid layer 9. The molten metal is parted, cooled and solidified b...

Formulation comprises a particulate medicament (I) e.g. salmeterol, salbutamol, fluticasone propionate, becolomethasone dipropionate and a fluorocarbon or hydrogen-contg chlorofluorocarbon propellant. Also claimed are the prepn of the surface-modified medicament and a canister for delivering metered doses of the aerosol formulation. Pref., (I) is salmeterol xinafoate (Ia); salbutamol sulphate; flu...

There is described a method of producing a cam for a jointed camshaft by sintering a compact made from a sintering powder, which is calibrated after sintering and then subjected to quenching and tempering. To avoid extensive rework, it is suggested that the compact be pressed, sintered and calibrated corresponding to a desired contour (4), which differs from the desired contour (1) of the cam cont...

The fixture device comprises a curved element (5) that is mountable on the object (90). It also has a body (3) that is in a section piece of a recess (32), to receive the curved element. It is also has a pair of channels (31) and an opening (311) in a second section piece on two opposed sides. The body has a number of ratchets (312) that are regularly separated on the two opposed sides of the open...